Use; Vacuuming - Nederman S Serie Manual De Instrucciones

Ocultar thumbs Ver también para S Serie:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 49
EN
S - Vacuum Cleaners
6
6.1
NOTE! Clean the filter after each use.
18
CAUTION!
Risk of equipment damage.
If the fan rotates incorrectly, its capacity will be reduced and the impeller can
be damaged.

Use

WARNING!
Risk of personal injury.
Only properly trained personnel are allowed to use this vacuum cleaner.
Do not use vacuum cleaner to collect material that is caustic, hot, explosive,
highly flammable, chemically unstable, spontaneously ignitable, or which
can release sparks.
Do not use the fan to transport aggressive, toxic or explosive gases and
gases with high moisture content.
Do not use if the ambient temperature exceeds 40°C.
The fan can become very hot, even during normal operation.
Always use proper lifting equipment and protective gear when using lifting
lugs to lift vacuum cleaners.
Do not place vacuum cleaner on an uneven surface.
Do not expose the body to vacuum inlets when operating the unit.
Side Channel Blowers have high suction power. Objects, clothing and hair
can easily be sucked into the fan and cause injury. Do not wear long, loose
hair or wide, loose clothes! Use a hair net.
Never put the hand directly at the inlet.
Make sure that no one is near the inlet side when the fan operates.
The fan must never be operated without a wire guard because the rotation
impeller can cause serious injury.
There is a powerful stream of air from the discharge side or outlet. Foreign
bodies that might have been sucked into the fan can be thrown out at high
speed and cause injury.
All foreign objects and debris that could exit through the fan's outlet must
be filtered out before going through the fan.
Never put the hand directly at the outlet.
Do not insert objects into the fan through the outlet.
CAUTION!
Risk of equipment damage.
Do not use the vacuum cleaner if there is restricted or no airflow. The fan
motor can become overheated. Prevent overheating by ensuring that a flow
of air passes the fan.
Motors rotating in the wrong direction can cause overheating.
Turn off vacuum cleaner if dust escapes from it.

Vacuuming

1.
Connect power supply.
2.
Turn on the fan. See section 6.2 Connection/start.

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

690s680s

Tabla de contenido