Metra Electronics 99-7811 Instrucciones De Montaje página 4

7. Remove (2) Phillips screws
securing the storage pocket and
then remove. If equipped with a
rear DVD player instead, remove
(2) Phillips screws from the sides,
and (2) E-12 reverse (external)
Torx screws from the top, and then
remove. (Figure G)
8. Remove the (2) upward facing
10mm bolts from the brackets on
the bottom of the radio. (Figure H)
9. Unclip and remove the radio/vent
assembly. (Figure I)
10. Remove the clips from the radio/
vent panel (note the orientation
and location of the clips, they must
be installed in the same position
on the new radio/vent panel).
11. Remove the (1) Phillips screw from
each vent to remove, and then set
aside for kit assembly.
Continue to kit assembly
Dash Disassembly
(Figure G)
99-7811
(Figure H)
4
(Figure I)