Publicidad
Idiomas disponibles
Idiomas disponibles
5. Connecting additional lamps to your Philips
LivingWhites remote control
You can connect other Philips Lighting products to your
Philips LivingWhites remote control to create immersive
lighting scenes. There are numerous possibilities:
1.
You can connect multiple Philips LivingWhites
Energy Savers to one remote control. Bring the
remote control close to the new lamp, then press
and hold the "I" button. The lamp will flash three
times. Hold the "I" button a little while longer
until the lamp flashes two times and the remote
control plays a sound. You can release the "I"
button now. The lamp you have linked can now be
controlled with the remote control. You can add
up to 50 lamps to one Philips remote control.
2.
You can also connect other Philips LivingAmbiance
products (LivingColors, luminaires, plugs) to your
Philips LivingWhites remote control. In order to
add a Philips LivingAmbiance lamp to your Philips
LivingWhites remote control, bring the remote
control close to the lamp and press and hold the
"I" button in the same way as described above.
6. Frequently asked questions
What to do if...
•
The LivingWhites Energy Saver is not responding
to the remote control
o
Check the batteries in the remote control. The
batteries should be correctly inserted (+ and -)
and should be charged. If the remote control is still
not working, try replacing the batteries
o
Link the remote to the lamp by following the
procedure described in section 2 of this manual.
•
The Scene buttons are flashing after I have used
the remote control
o
This means that the batteries in the remote
control are almost empty and need to be replaced.
•
What is the maximum distance between the
remote control and the LivingWhites lamp?
o
The guaranteed distance at which the lamp
responds to remote control is 15 metres. That
means that at least one lamp must be within 15
metres of the remote control and other lamps
must be a maximum of 15 metres apart from
each other.
•
My question is not listed here
o
Please contact Philips for assistance (see section 7
"Additional support").
7. Additional support
Service:
For your information and in case of any problems, please
visit the Philips website at www.philips.com or contact
the Philips Lighting Contact Centre free of charge:
00800-PHILIPSL or 00800-74454775
Warranty:
Philips two years warranty is valid if the product is used
in accordance with the instructions and for its intended
purpose. Claims will only be accepted on submission
of the original proof of purchase (invoice, sales slip or
receipt) stating the purchase date, the name of the
dealer and a description of the product.
The Philips warranty is invalid if:
•
Anything has been changed, crossed out, deleted
or rendered illegible on the purchase docket or
product description.
•
The failure is caused by damage, faulty connections
or abuse.
•
defect is caused by extreme circumstances not
inherent to the LivingColors, for example, lightning,
flooding, fire, incorrect use or negligence.
•
The LivingWhites lamp has been opened or
disassembled.
Safety instructions:
•
Keep the plug and LivingWhites lamps away from
liquids and humidity.
•
LivingWhites lamp is for indoor use only. Do
not use in wet locations, e.g. in bathrooms or
outdoors.
•
LivingWhites lamps and remote control are not
toys and are not designed to be played with by
children.
•
Do not place on hot surfaces
•
For safety reasons and under the terms of the
warranty, the LivingWhites lamps must not be
opened.
Environment:
If you need to discard the lamp, dispose of it in
accordance with instructions from the local authority.
Remove the batteries when you discard the remote
control. Do not throw batteries away with normal
household waste. They must be handed in at an official
collection point or at a Philips Dealer, both of which will
dispose of the batteries in an environmentally friendly
way.
11
Publicidad
