MAXTOOLS JSL280 Manual Del Usuario página 15

INSTRUCTIONS FOR USE
Indicator
Press the push button in order to check the charge state of the device.
Indicator
Charge level
The indicator will flash one by one during the period of charging. Different number
of solid indicators show different storage level of Jump Starter. All indicators light
off when the charging is paused or completed.
Recharge instructions
1. Connect the USB cable to the charger and plug it into a power outlet.
2. Connect the Micro-USB cable to the ultra-fast charging socket of the device.
Alternatively, connect the Micro-USB cable to the charging socket of the device
then connect it to an active USB port.
Switched off 1 Led
0% 25%
2 Led 3 Led
50% 75%
English
4 Led
100%
15