MAXTOOLS JSL280 Manual Del Usuario página 16

English
Jump start 12V vehicle Instruction
1. Connect the blue plug fully seated into the host,
and make sure the Cable Indicator is off.
2. Connect Red Clamp to the positive (+) battery
terminal, Black Clamp to the negative (-)
battery terminal.
3. Operate following the instruction of the Cable
Indicator:
Beep, Beep
Beep, Beep
16
GREEN LIGHT
Telling the connection is correct and the circuit
is working, you can turn on the engine to jump-
start directly.
Beep, Beep
RED LIGHT on with buzzing:
Indicates reversed polarity. Invert the connection
immediately.
on: