Descargar Imprimir esta página

MAXTOOLS JSL280 Manual Del Usuario página 17

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Beep, Beep
Beep, Beep
4.
Turn the ignition key for a maximum of 3 seconds and then wait for a further
3 minutes before attempting to jump start again.
5.
When the engine is running, remove one clamp at a time, return the clamps
to their housing and recharge the starter as soon as possible.
Note: when the BOOST button is pressed for over two seconds, the security function
of the device is inhibited for 30 seconds. Once the engine has been jump started,
the cables must be quickly disconnected from the battery in order not to overload it.
GREEN LIGHT
buzzing:
Indicates very low battery. Press the BOOST
button for two seconds and then jump start the
engine.
No Lights on, No buzzing:
Indicates absent or interrupted vehicle battery.
Press the BOOST button for two seconds and
then jump start the engine.
English
blinking with
17

Publicidad

loading

Productos relacionados para MAXTOOLS JSL280

Este manual también es adecuado para:

Jsl350