Change Settings; General (Sleep, Standby; Picture; Sound - Philips DVP2800/F7 Manual Del Usuario

3 Change settings

This section helps you change the settings of
this player.
1
2
3
Note
•
You cannot change a menu option that is grayed out.
•
To access [Preference], stop the disc play.
•
To return to the previous menu, press . To exit the
menu, press .

General (sleep, standby...)

1
Press .
2
Select [Setup] > [General] to access the
general setup options.
• [Disc Lock]: Lock or unlock a disc for play.
To play a locked disc, you need to input
your password: press
digit, and press
position. The default password is "136900".
[OSD Language]: Select a language for on-
•
screen menu.
[Sleep Timer]: Set a period of time for this
•
player to switch automatically to standby
mode from play.
[Auto Standby]: Enable or disable auto
•
standby. If enabled, this player switches
automatically to standby after 15 minutes
of inactivity (for example, in pause or stop
mode).
EN
10
Disc Setup
Unlock
Disc Lock
General
OSD Language English
Sleep Timer
Off
Video
Auto Standby On
Audio
Preference
to enter a
/ to change a digit

Picture

1
Press .
2
Select [Setup] > [Video] to access the
video setup options.
• [TV System]: Select a TV system that
matches your TV. By default, this setting
matches the common TVs in your country.
• [Aspect ratio]: Select a picture display
format to fit the TV screen.
[Picture Setting]: Select a predefined color
•
setting, or customize a setting.
[Closed Caption]: Enable this feature
•
to show the sound effects in subtitles.
Applicable only when both a disc and a TV
support this feature.

Sound

1
Press .
2
Select [Setup] > [Audio] to access the
audio setup options.
• [Analogue Output]: Select an audio format
for sound output when this player is
connected through the AUDIO OUT L/R
connectors.
• [Digital Audio]: Select an audio format
for sound output when this player is
connected through the COAXIAL
connector.
[Digital Output] - Select a type of
•
digital output: [Off] - Disable digital
output; [All] - Support multi-channel
audio formats; [PCM Only] - Downmix
to two-channel audio signal.
[LPCM Output] - Select a LPCM
•
(Linear Pulse Code Modulation)
output sampling rate. The higher the
sampling rate, the better the sound
quality. [LPCM Output] is enabled only
when [PCM Only] is selected under
[Digital Output].
• [Volume]: Change a volume level.