SPALDING M7A1021 Manual Del Usuario página 12

Assemble the Base
A
ASSEMBLE THE POLE
WHEN PROPERLY POUNDED TOGETHER, THE POLE SECTIONS SHOULD HAVE A 3 1/2" (9 CM) OVERLAP.
IF MINIMUM POLE ENGAGEMENT OVERLAP OF 3 1/2" (9 CM) CANNOT BE ACHIEVED !! STOP !! DO
NOT PROCEED TO THE NEXT STEP! - CALL SPALDING CUSTOMER SERVICE AT 1-800-558-5234 FOR
ASSISTANCE.
Align dimple of top pole section (4) into trough of middle pole section (5) as shown.
2. While maintaining alignment, bounce the middle pole section (5) into top section (4) using a wood
scrap as shown until the top pole moves to the 3 1/2" (9 cm) line you previously made on the
middle pole (5).
3. Align the assembled oval pole section with the bottom (6) pole section and slide together.
4. Bounce the assembled sections on a scrap wood board until the overlap reaches the marked line.
#5
#4
#5
#6
CAUTION
NOTE
#5
3-1/2"
(9 cm)
#4
#4
#5
3-1/2"
(9 cm)
#6
12