SPALDING M7A1021 Manual Del Usuario página 19

F
ASSEMBLE THE BACKBOARD
5. Support the pole on a sawhorse. Attach upper and lower elevator tubes (41 and 42) to upper pole
(4) using bolts (43) and nuts (40).
6. Attach the pole cap (22).
#43
7. Attach adjustment tube (38) assembly to lower elevator tubes (41) using bolt (43), spacers (29),
and nut (40).
TIGHTEN THE BOLT (43) IN THE LOCK NUT (40) UNTIL IT IS FLUSH (EVEN) WITH THE OUTER EDGE OF THE NUT.
#22
#42
#38
WARNING
19
#41
#40
#4
#43
#29
#40
Assemble the Backboard
#41