Perry Electric 1DIN Manual De Instrucciones página 11

C) Stair cleaning function
It may be useful to disable relay timer operation in some instances, for this reason the stair cleaning function
It is enabled by pressing one
of the control buttons for 5
seconds;
RESET
Stair cleaning operation can
be stopped at any time by
pressing one of the control
buttons for less than 5
seconds; or it can be restarted
by pressing one of the control
buttons for 5 seconds.
Note: When the stair cleaning function is interrupted, the lights switch off
after the set timing cycle has finished (see sect. 3).
operation involves enabling
the relay for a pre-set time
(factory setting is 30 minutes, it
can be changed from 1 to 99
min.)
s
+ +
_ _
5 seconds
C C
Stop
Restart
less than
5 seconds
5 seconds
" "
was designed
During operation it is possible
to change the set time using
-
+ or ; the new setting is
automatically memorized 5
seconds after +
s s
pressed for the last time.
RESET
+
_
C
The lights switch off for a very short period (300 ms) each time it is
enabled.
The end of the set time is indicated by a Warning (see paragraph A);
the lights switch off after the programmed timing cycle has finished
(see sect. 3).
>5"
Button
Relay
42'
42'
-
or are
s s
RESET
+
_
C
T
11