Hardware Reset - Perry Electric 1DIN Manual De Instrucciones

5 - OPERATING TIME COUNTER
Display of operating time
The timer memorizes the count of total hours of active relay operation.
The memorization is increased by one unit on the elapsing of each hour. If a
Reset is done before the full hour has elapsed, the increase will not be
memorized. To display the counter, press the key
will stay on for 10 seconds.
Operating times are displayed in the following manner:
From 0 to 9999 the total number of hours is displayed (fig. A)
From 10000 to 999900 the multiplier X100 is switched on
ex. (10000 hours = 100
Cancelling operating times
The hour count can be reset while the counter is displayed, by pressing the
key again for 5 seconds until the flashing symbols appear on the display,
C
as shown in fig. C.
When the key C is released the initial display (fig. D) appears.
6 – HARDWARE RESET
In the case that the device shows anomalous displays or improper
functioning, insert a thin pointed object (max 1 mm) in the hole of the panel
front, marked RESET , and press once (fig. E).
Hardware resetting does not cancel the settings previously entered in the
memory.
DISPOSAL OF ELECTRICAL & ELECTRONIC EQUIPMENT
This symbol on the product or its packaging to indicates that this product shall not be treated as household waste.
Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment, such as for example: sales points, in case you buy a new and similar product; local
collection points (waste collection centre, local recycling center, etc...). By ensuring this product is disposed of correctly, you will help prevent potential negative consequence for the environment and human
health, which could otherwise be caused by inappropriate waste handing of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of
this product, please contact your local city office, your house hold waste disposal service or the shop where you purchased the product.
12
for 5 seconds; the display
C
X100 ) (fig. B)
The manufacturer reserves the right to make all technical and manufacturing modifications deemed necessary without prior notice.
2
h s
d
RESET
h
+
_
C
A
Press
5 seconds
1 2
h
s d X 1 0 0
RESET
h d
s
+
_
C C
Press
5 seconds
RESET
C
E
h X 1 0 0
B
1 2
X 1 0 0 s
D
+
_