Technical Specifications - Perry Electric 1DIN Manual De Instrucciones

MULTIFUNCTIONAL STAIRCASE TIMER - 1DIN
ENGLISH
with backlit display
WARNINGS!
Read this manual carefully before using the
product as it provides important guidelines
regarding safety, installation and use. The manual
must be preserved with care for future reference.
Warning! Installation by person with
electrotechnical expertise only.
This equipment will be intended only for use for which it
was specifically built.
Before starting any operations on the device, disconnect
the 230V~ mains power supply

1 - Technical specifications

Supply:
Type of output:
Example of maximum operating power:
tungsten lamps
fluorescent lamps
2300 W (23 lamps x 100W) 290 W (5 lamps
Maximum wire section at terminals:
Time setting range:
Stair cleaning timer:
Switch off warning:
Maximum Nr of illuminated buttons:
Maximum current absorbed by illuminated buttons:
Operating temperature limits:
Storing temperature limits:
Protection degree:
Installation:
Reference standard for CE mark:
¸
230V~ 50 60Hz
Relay with NA single-pole polarized contact,
16A / 250V~
electronic fluorescent lights
x 58W 35 µF)
max 7 lamps (7W ÷ 15W)
1 mm² ÷ 2,5 mm²
from 1" to 99' e 59".
30 min. (can be set from 1 min. to 99 min.)
Lamp switches off for 300ms 15"before
end of the set cycle
35
50 mA
0 ÷ +50 °C
-10 ÷ +65 °C
IP 40
DIN rail -
Wall mounting
(with optional terminal cover ) IP30
LVD EN60669-2-3
EMC EN60669-2-1
LED lamps
max 7 lamps (7W ÷ 15W)
EN60669-2-1
7