Preliminary Checks - Genius G60 Guia De Inicio Rapido

ENGLISH
4. DESCRIPTION
5. P RELIMINARY CHECKS
The door structure must be suitable for automation. In particular,
check that the door dimensions conform to those given in the
technical specifications and that the door is strong enough.
Check the efficiency of the door bearings and joints.
Make sure the door moves smoothly; if necessary, clean the
guides and lubricate them with silicone-based products (do
not use grease).
Check correct balancing.
Remove the door's mechanical closing devices so that the
door is closed by the automatic system.
Check if there is an efficient earth plate for electrical connec-
tion of the operator.
Make sure there is a clearance of at least 35 mm between
the
Fig. 4
Ceiling fixture

Plastic housing

Courtesy light

Electronic equipment

Motor

Operator support

Rear connection

Operator fixing bracket

 Sliding guide
Drive carriage

Release knob

Door connection bracket

Transmission unit

Front connection and chain adjuster

Front connection bracket

ceiling and the highest sliding point of the door (fig. 4 and 5).
With sectional doors, check that the upper guide roller is in the
horizontal part of the guide when the door is closed (fig. 6).
Fig. 5
14
ENGLISH
Fig. 3
Fig. 6