Specifications; Reference Conditions; Characteristics Per Function - Chauvin Arnoux C.A 6545 Manual De Instrucciones

7.1. REFERENCE CONDITIONS

Infl uence quantities
Temperature
Relative humidity
Supply voltage
Frequency range
Capacitance in parallel on resistance
Electric fi eld
Magnetic fi eld

7.2. CHARACTERISTICS PER FUNCTION

7.2.1. VOLTAGE
 Characteristics
Measurement range
Frequency range (4)
Resolution
Accuracy
Input impedance
(4): Above 500 Hz, the small display indicates "- - - -" and the main display gives only a rough indication of the peak
value of the measured voltage.
 Measurement category: 1000 V CAT III or 2500 V CAT I (transients   2.5 kV)
7.2.2. INSULATION RESISTANCE
 Method: Voltage-current measurement per IEC 61557-2
 Nominal output voltage: 500, 1000, 2500, 5000 Vdc (or adjustable from 40 V to 5100 V)
 Adjustment step in variable mode: 10 V from 40 V to 1000 V
 Off-load voltage:   1.02 x Un ± 2% (Un ± 2% in variable mode)
 Nominal current:   1 mAdc
 Short-circuit current: < 1.6 mA ±5%
 Charging current into capacitive component: 3 mAdc approximately when starting measurement
 Maximum acceptable voltage during measurement: Upeak = (1.1 + dISt) Un + 60V

7. SPECIFICATIONS

Reference values
23 ± 3 °C
45 to 55 % RH
9 to 12 V
DC and 15.3 to 65 Hz
< 40 A/m
1.0...99.9 V 100...999 V
DC and 15 ... 500 Hz
0.1 V 1 V
1% +5 pt
750 k  to 3 M  depending on measured voltage
100 V from 1000V to 5100 V
71
0 µF
nil
1000...2500 V
2 V
1% +1pt
with dISt = 0.03 – 0.10 or 0.20
2501...4000 V
DC
2 V