Using The Radio; Connecting The Radio; Fm Mode; Scanning For Station In Fm Mode - Tangent CINQUE Manual De Usuario

Idiomas disponibles

Using the radio

Place the radio on a plain surface. Connect the included adaptor to the radio.

Check that all other connections have been made correctly before inserting the mains plug

into the wall socket. Check that the mains voltage is correct according to the voltage stated

on the adaptor before turning on the power.

The Tangent Cinque will go into standby and is ready for use.

Turn the unit on by pressing the power button on the front panel. The display will show the

message below.

When the radio is in standby, you can see what mode the radio will start up in, when it is

turned on next time. The radio will display either FM and the time or AM and the time. The

display will not be as brightly illuminated in standby mode, as when the unit is turned on.

When the radio is on, select FM mode by pressing the MODE button until the message

below appears in the display.

To scan for stations in FM mode, press the SEEK+ or SEEK- buttons to scan either up or

down in frequencies. The radio will then search for the first coming available station, and

stop when it has found that.

It is also possible to tune manually by pressing the TUNE LEFT or TUNE RIGHT buttons or

turning the TUNE button on the front panel. Turn the TUNE button on the front panel

clockwise to tune up in frequency and counter clockwise to tune down in frequency.

Tabla de Contenido