Setting The Alarm - Tangent CINQUE Manual De Usuario

Setting the alarm

Before setting the alarm, the internal clock must be set. Please see the part "Time and
Date" above for reference.
To set the alarm, press and hold the ALARM button for 2 seconds to access the alarm time
set mode. In the alarm time set mode, use the TUNE knob to change values in alarm time
and alarm type, and confirm the choice by pressing the ENTER button.
When in the alarm time set mode the display will show the current time in the upper center
of the display. The lower center of the display will show the alarm time. The lower left corner
of the display will show if the alarm is ON or OFF. The lower right corner of the display will
show the alarm type.
The on/off indicator in the lower left corner will start to flash, select on of off by turning the
TUNE button and press enter to confirm.
Now the hour indicator of the alarm time will start to flash. Adjust the hour of the alarm time
by turning the TUNE knob and confirm by pressing ENTER.
Now the minute indicator of the alarm time will start to flash. Adjust the minute of the alarm
time by turning the TUNE knob and confirm by pressing ENTER.
The alarm type indicator in the lower right corner will start to flash. Adjust the alarm type by
turning the TUNE knob and confirm by pressing ENTER.
The finally the alarm volume needs to be set. Adjust the volume of the alarm by turning the
TUNE knob and confirm by pressing ENTER.
The alarm is now set, and the radio must be turned off, in order for the alarm to work. When
the alarm is on, the display will show a note in the right side of the screen.
18