Sleep Timer - Tangent CINQUE Manual De Usuario

If you press the SNOOZE button after an alarm has been activated, the alarm will be
delayed for between 1 and 10 minutes.
When the snooze function is active, the display will show a flashing "Z" in the upper right
conrner.
To adjust the snooze time, press the MENU button to enter the settings menu. Turn the
TUNE button on the front panel until the display shows <Snooze Set> and then press the
ENTER button to enter the Snooze settings.
Turn the TUNE button to adjust and confirm by pressing ENTER.
Exit the settings menu by pressing the MENU button again.
Note: If the SNOOZE button is pressed during standby, the display will be iluminated for 10
seconds, so it is possible to check the time in darkness.

Sleep timer

The radio has a sleep timer function. This makes the radio able to turn off by it self. To
activate the sleep function press and hold the SLEEP button for 2 seconds, set the sleep
function on or off by turning the TUNE button, and confirm with ENTER. Then choose how
long there should go before the radio turns off by turning the TUNE button. Choose between
15 minutes, 30 minutes, 45 minutes, 60 minutes, 75 minutes and 90 minutes. Confirm your
choice with ENTER.
When the sleep timer is activated. The display will show a "s" on the right side.
To set the sleep timer off again, simply press the SLEEP once again.
If the POWER button is pressed, the radio will go into standby and the sleep timer function
will be cancelled
It is also possible cancelling the sleep function by choosing off in the sleep timer menu, the
same way as the sleep timer was set on.
17