Overview; Charging The Battery; Removing/Inserting The Battery - Grizzly AHS 1845 T Lion Traducción Del Manual De Instrucciones Original

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 72

Overview

Device
1 Safety blade
2 Cutting head
3 Vents
4 Lock button for cutting head that
can be angled
6 Screw sleeve telescopic arm
7 Telescopic arm
8 Quick release fastener
(for telescopic arm)
9 Wrench
10 Soft grip
11 Carrying eyelet for shoulder
strap
12 Rechargeable battery
13 Safety switch
14 On/off switch
15 Grip
Accessories
16 Blade protection
9 Wrench
12 Rechargeable battery
12a Release key battery
12b State of charge display battery
(LED)
12c Key for state of charge display
17 Shoulder strap
18 Battery charger

Charging the battery

Do not expose the battery to
extreme conditions such as heat
or impact. Risk of injury from
escaping electrolytic solution!
After eye/skin contact, rinse the
affected areas with water or a
neutraliser and consult a doctor.
Charge the battery in a dry
room only. Prior to attaching the
charger, check that the battery's
outer surface is clean and dry.
There is a risk of injury due to
electric shock.
Only use the original charger from
the package to charge the battery.
Mind not to charge the appliance
for more than 3-5 hours at a time.
If you do, the battery and the appli-
ance may be damaged and longer
charging times would be a waste
of energy. Excessive charging will
void the warranty.
Charge the battery before the first
time of use. Do not briefly charge the
battery several time in a row.
If a fully recharged battery lasts for con-
siderably shorter operating times, the
battery is used up and needs to be re-
placed. Only use an OEM spare battery
available from our Customer Service.
Always take heed of the applicable
safety instructions as well as the envi-
ronmental protection regulations and
information.
The warranty excludes all defects
caused by improper handling.
Removing/inserting the bat-
tery
1. To insert the battery (12), place
it on the guide track and push it
into the appliance. It will audibly
snap in.
2. To remove the battery (12) from
the appliance, press the release
button (12a) on the battery and
pull out the battery.
GB
29

Publicidad

Tabla de contenido
loading

Tabla de contenido