Atlas Copco G2420 Manual De Producto página 16

Service
7. Put the deflector (2) on the adapter (3).
8. Apply a few drops of threadlocker on the adapter (3), attach it to the grip
cover (1) and tighten it to 29.4 Nm.
9. Attach the safety lever (14) to the motor housing (6) with the pin (13).
10. Do an air blow and air leaking test.
Assembling the tension arm
1. Push the bearings (28) into the idle pulley (29).
2. Attach the assembled idle pulley (29) to the tension arm by hitting the pul-
ley pin (27).
Make sure that the idle pulley rotates smoothly.
3. Attach the shoes (30) on both sides of the tension arm (31) by using quick
dry bonding agent.
16
EN
© Atlas Copco Industrial Technique AB - 9839 0458 00
G2420