EN
Disclaimer and Warning
Congratulations on purchasing your new DJI OSMO
safe and lawful practices provided by DJI OSMO before use. Failure to read and follow instructions and
warnings may result in serious injury to yourself or others, damage to your DJI OSMO product, or damage
to other objects in the vicinity. By using this product, you hereby signify that you have read this document
carefully and that you understand and agree to abide by all terms and conditions of this document and all
relevant documents of this product. You agree to only use this product for proper purposes.
You agree that you are solely responsible for your own conduct while using this product and for any
consequences thereof. DJI OSMO accepts no liability for damage, injury, or any legal responsibility
incurred directly or indirectly from the use of this product.
RONIN is a trademark of SZ DJI OSMO TECHNOLOGY CO., LTD. (abbreviated as "DJI OSMO") and its
affiliated companies. Names of products, brands, etc., appearing in this document are trademarks or
registered trademarks of their respective owner companies. This product and document are copyrighted
by DJI OSMO with all rights reserved. No part of this product or document shall be reproduced in any
form without the prior written consent or authorization of DJI.
This document and all other collateral documents are subject to change at the sole discretion of DJI
OSMO. This content is subject to change without prior notice. For up to date product information, visit the
product page for this product at http://www.dji.com.
Warning
1. It is not recommended to use the LiDAR range finder in conditions with low visibility such as foggy or rainy
weather. Otherwise, the detection range may be reduced.
2. DO NOT touch the optical windows of the LiDAR range finder. Dust and stains on the optical windows can
negatively affect the performance. Use compressed air or a wet lens cloth to clean the optical windows.
Introduction
The DJI LiDAR Range Finder can be used with the X9 gimbal camera so that RONIN
quickly without reducing image quality. Autofocus, Manual Focus, and Automated Manual Focus are
available when using the LiDAR range finder and Autofocus is available with a manual lens when using
with an X9 focus motor.
8
TM
product. Carefully read this entire document and all
4D can focus
TM