Other Display Symbols; Symbols On Labels; Symbol Meaning - Fluke Biomedical RAYSAFE 452 Manual Del Usuario

If an error occurs, the measurement screen is blocked by an error
symbol on red background (1 in Figure 12 on page 13), and the
instrument emits a beep every fifteenth second. While the screen is
red, the instrument does not measure.
If the error ends, the instrument automatically starts a new
measurement while the error symbol remains on black background
(2 in Figure 12 on page 13). Press the center button to confirm the
symbol and to view the ongoing measurement (3 in Figure 12 on page
13).
ERROR
SYMBOL TYPE ACTION
Instrument error (#2, Restart the instrument. If the error remains,
#3, #4, #6, #7, #8) contact support. See "Service and support
contacts" on page 21.
Dose rate too high The dose rate is outside the specification.
Increase the distance to the radiation source to
lower the rate.
Instrument too cold Let the instrument warm up to above −20 °C
(−4 °F).
Instrument too warm Let the instrument cool down to below 50 °C
(122 °F).
Correct type of lid Mount a lid supplied with the instrument and/or
not detected make sure that the lid is properly mounted. Some
instrument models require a lid to operate.
RaySafe 452 – Users Manual (EN)

Other display symbols

SYMBOL TYPE
New measurement
started
Corrupt
measurement

Symbols on labels

SYMBOL MEANING

Manufacturer Manufacturer
Manufacturer
Date of manufacture
Date of manufacture
Date of manufacture Catalogue number
Catalogue number
Manufacturer
Catalogue number
Serial number Serial number
Date of manufacture
Serial number
Consult the instructions for
Consult the instructions for
Catalogue number
Consult the instructions for
Caution Caution
Caution
CCC Mark
CCC Mark
Serial number
CCC Mark
LOT Mark / Batch
LOT Mark / Batch
Consult the instructions for
LOT Mark / Batch
Caution
CCC Mark
LOT Mark / Batch
14
MEANING
After 24 hours of continuous measurement, the
instrument automatically stores a measurement
and starts a new measurement. Confirm this
with a press on the center button to return to the
measurement screen.
This stored measurement is corrupt, and can not
be displayed.
Manufacturer
Article number
Serial number
Conforms to European Union directives.
This product complies with the WEEE Directive marking requirements.
The affixed label indicates that you must not discard this electrical/
electronic product in domestic household waste. Product Category:
With reference to the equipment types in the WEEE Directive Annex
I, this product is classed as category 9 "Monitoring and Control
Instrumentation" product. Do not dispose of this product as unsorted
municipal waste.
WARNING – RISK OF DANGER. Consult user documentation.
Conforms to relevant Australian Safety and EMC standards.