English - Bang & Olufsen BeoLine Guia

4
Connection
> Connect the cords as shown. The
base indicator light (A) flashes
red, indicating that the base is
open for registration of
handsets.
> Refer to the Guide enclosed with
your handset for information
about how to proceed with your
handset.
If the mains adaptor is not plugged
in, or if the power supply is cut off,
your phone will not function. Make
alternative arrangements for access
to emergency services.

English

Feedback – indicator light
The indicator light on the base (A)
informs you about the current state
of the base. The signals are
explained below:
Light off ... power off. Connect
the base to the mains.
Solid green ... power on, one or
more handsets registered.
Solid red ... Power on, no hand-
sets registered.
Flashing red ... Power on, base
open for registration of
handsets. Upon connection to
the power outlet, the base is
open for five minutes, after
which the light shines either
green or red (depending on
whether or not you registered a
handset in that time). If you
choose to register an additional
handset, a new five-minute
period begins, and you can
register the next handset.
Placement
To obtain the best range, place the
base in a high and free-standing
location, and do not mount it on a
metal plate. When attaching the
base to the wall bracket with the
double-sided tape as shown, press
the base against the wall bracket
for at least ten seconds.
Do not place the base in damp,
dusty or dirty environments, and
do not expose it to moisture or
direct sunlight. Do not place it near
microwave ovens or similar
appliances.
Maintenance
Use a soft, damp cloth with a few
drops of mild detergent added to
clean the base.