Maintenance And Cleaning - oneConcept Freshboxx Manual De Instrucciones

MAINTENANCE AND CLEANING

Changing the filter
Cleaning
WARNUNG
Danger of electric shock
Always remove the plug from the socket-outlet and allow the
fan blower to stop acting before cleaning it.
Do not immerse the unit in water.
• Always remove the plug from the socket-outlet and allow the fan blower
to stop acting before clean it.
• Clean the external surfaces of the unit with a soft damp (not dripping wet)
cloth.
• Do not use any cleaning chemicals such as detergents and abrasives.
• Do not allow the interior (special for the PCB) to get wet as this could
create a hazard.
• After extended periods of use, be sure to replace the water in the tank
with fresh clean water at least weekly. Also remember to clean the filter by
unscrewing the filter and removing the filter cradle. It should be cleaned in
a mild soapy solution and then left to dry before replacing the filter.
• When the unit is not in use, make sure that it is unplugged from the wall
socket, water is drained thoroughly and it is placed back into its original
2
1
1. Pull out the dust-proof bracket
2. Rotate the filter knobs outwards
like up photo
3. Take up the honeycomb filter .
3
EN
17