Parts List - Peak 3D MULTIHORSE 5201 Manual Del Usuario

INSTRUCTIONS FOR USE
IMPORTANT: READ THE ENTIRE SAFETY INFORMATION SECTION AT THE BEGINNING OF
THIS MANUAL BEFORE SET UP OR USE. READ ALL INSTRUCTIONS CAREFULLY. FAILURE
TO FOLLOW ALL INSTRUCTIONS CAN RESULT IN DEATH OR SERIOUS INJURY. KEEP THIS
MANUAL FOR FUTURE REFERENCE.
UNPACKING: when unpacking, check to make sure that the Product is intact and
undamaged. DO NOT USE A DAMAGED, INCOMPLETE OR IMPROPERLY ASSEMBLED
PRODUCT.
BEFORE EACH USE: inspect the general condition of the Product or any Assembly.
Check for loose parts, misalignment or binding of moving parts, cracked, bent or
broken parts, or any other condition that may affect its safe operation. Clean and
clear the Product or any Assembly to make sure its safe use will not be compromised.
DO NOT USE PRODUCT OR ANY ASSEMBLY IF DAMAGED OR OTHERWISE RENDERED
UNSAFE.
NOTE: Diagrams within this manual may not be drawn to scale.

PARTS LIST

X 2
Outside Left
Boots
Made in China for:
The Peak Group of Companies
as defined by: www.peakproducts.com
P.O. Box 96060, Richmond BC, Canada V7A 5J4
3D MULTIHORSE™ brackets
Fasteners
X 16
X 2
Outside Right
Boots
X 2
Model # 5201
V1 © Peak Innovations Inc., 2015
X 2