Peak 3D MULTIHORSE 5201 Manual Del Usuario página 8

Temporary Shelter
Assembly Instructions
Safety information
• IMPORTANT: READ THE ENTIRE SAFETY
INFORMATION SECTION AT THE BEGINNING OF
THIS MANUAL BEFORE SET UP OR USE. READ ALL
INSTRUCTIONS CAREFULLY. FAILURE TO FOLLOW ALL
INSTRUCTIONS CAN RESULT IN DEATH OR SERIOUS INJURY.
• Do not build a Temporary Shelter higher than 6' (1.82 m) and larger than a 6' x 6'
(1.82 m x 1.82 m) at the base.
• Do not install or use Temporary Shelter in adverse weather conditions such as wind, rain,
snow, or ice.
Required Materials
- Eight 2x4 pieces - max. length 6' (1.82 m)
- Two 1x4 Horizontal Braces - max. length 6' (1.82 m)
- Two 1x4 Diagonal Braces - max. length 6'6" (1.98 m)
- Sixteen #10x1¼" (32 mm) wood screws (provided)
- Sixteen #10x2" (51 mm) wood screws (not provided)
Note: All lumber must be No. 1 structural grade that is free of cracks,
splitting, loose or large knots, decay, twist, and/or any other defect.
Installation
1. Install two 2x4
pieces into brackets
and fasten each
end with #10x1¼"
(32 mm) wood
screws.
2. Attach two more 2x4 pieces to brackets
using two #10x1¼" (32 mm) wood screws
on the side of each bracket.