Electrical Safety; Noise Pollution; Vibration Load - AL-KO solo GT 4235 Manual De Instrucciones

GB
■
Do not overload the appli-
ance. It is intended for light
work in the private sector.
Overload can lead to damage
to the appliance.
■
Never operate the appliance
with worn or defective parts.
Always replace defective
parts with original spare parts
from the manufacturer. If the
appliance is operated with
worn or defective parts, guar-
antee claims against the man-
ufacturer are excluded.

3.1.5 Electrical safety

■
To avoid short-circuits and de-
stroying electrical compo-
nents:
■
Protect the appliance
against humidity and do not
use it in the rain.
■
Do not spray the appliance
with water.
■
Do not open the appliance.
NOTE
Heed the safety instruc-
tions for the rechargeable
battery and for the
charging unit in the sepa-
rate operating instructions.

3.1.6 Noise pollution

A certain level of noise exposure
from this appliance is inevitable.
Carry out noisy work at ap-
32
proved and specified time peri-
ods. Observe rest periods as
necessary and restrict the dura-
tion of the work to a minimum.
For your personal protection and
protection of persons in the vi-
cinity, appropriate hearing pro-
tection must be worn.

3.1.7 Vibration load

WARNING!
Danger due to vibration
The actual magnitude of
the vibration emissions
during the use of the appli-
ance may deviate from
that stated by the manu-
facturer. Observe the fol-
lowing influencing factors
before or during use:
■
Is the appliance being
used as intended?
■
Is the material being cut
or processed in the
proper manner?
■
Is the appliance in a
proper condition of use?
■
Is the cutting tool prop-
erly sharpened or is the
correct cutting tool in-
stalled?
■
Are the handle grips
and any optional vibra-
tion grips mounted, and
are they firmly attached
to the appliance?
Safety instructions
GT 4235