Parts & Assembly - Nostalgia Products CBM8 Manual De Instrucciones

PARTS & ASSEMBLY
Parts
Heated
Base
Silicone
Chocolate
Molds
On | / Off O
Power Switch
Interlocking
Ice Trays
Assembly
1. Before first use, wipe down the Heated Base, Heating Pots, Ice Trays, Toppings Tray, Toppings
Spoons and Chocolate Molds with a damp, non-abrasive cloth and dry thoroughly.
NOTE: Be careful to not get any water in the Heated Base, or the unit will not function.
2. Assemble the Interlocking Ice Trays by connecting them into a full circle.
Optional: Replace one of the Ice Trays with the Toppings Tray.
3. Place the Silicone Chocolate Molds into each of the Ice Trays.
4. Thread the electrical plug of the Heated Base through the center of the Ice
Trays. Place the electrical cord between the gaps of each Ice Tray.
5. Set the Heated Base into the center of the Ice Trays and place a Heating Pot into the Heated
Base.
5
Toppings
Spoons
Heating Pot
(2 included)
Toppings
Tray