Technical Specifications - Metabo GA 18 LTX Manual Original

en ENGLISH

13. Technical Specifications

Explanatory notes on the specifications on page 3.
Changes due to technological progress reserved.
U = voltage of battery pack
S = spindle lock for easy tool changes
n = no-load speed (maximum speed)
n = no-load speed (adjustable)
V
n = on-load speed
1
P = rated input power
1
P = power output
2
D = max. sanding disc diameter
max
T = max. thickness of bonded grinding discs
max
d = collet bore of the collet chuck
m = weight with smallest battery pack/weight
without cord
L = maximum insertion depth
max
Measured values determined in conformity with
EN 60745.
Machine in protection class II
~
AC Power
Direct current
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
Emission values
These values make it possible to assess the
emissions from the power tool and to compare
different power tools. Depending on the operating
conditions, the condition of the power tool or the
accessories, the actual load may be higher or lower.
For assessment purposes, please allow for breaks
and periods when the load is lower. Based on the
adjusted estimates, arrange protective measures
for the user e.g. organisational measures.
Vibration total value (vector sum of three directions)
determined in accordance with EN 60745:
a = Vibration emission value
h, SG
K = Uncertainty (vibration)
h,SG
U = Unbalance
M
Typical A-effective perceived sound levels:
L = Sound-pressure level
pA
L = Acoustic power level
WA
K , K = Uncertainty
pA WA
During operation the noise level can exceed
80 dB(A).
Wear ear protectors!
Problems, faults:
In individual cases, the speed may fluctuate
temporarily if the machine is exposed to extreme
external electromagnetic disturbances or the
electronic restart protection may respond. In this
case, switch the machine off and on again.
18