Flex LK 604 Instrucciones De Funcionamiento Originales página 15

Grinder LK 604
When you have checked and inserted
the tool, ensure that you and anybody
in the vicinity remain outside the plane
of the rotating insertion tool and leave
the power tool running for one minute
at maximum speed.
Damaged insertion tools usually break
during this test time.
 Wear personal protective equipment.
Depending on the application, wear
full face protection, eye protection
or goggles. If appropriate, wear a dust
mask, hearing protection, protective
gloves and/or a special apron which
protect you from small sanding and
material particles.
You should protect your eyes from foreign
objects which are ejected for different
applications. Dust and respirator masks
must filter the dust which is generated by
the power tool for the particular application.
If you are exposed to loud noise for a pro-
longed period, you may suffer hearing loss.
 Ensure that other persons are situated at
a safe distance from the work area.
Anyone who enters the work area must
wear personal protective equipment.
Fragments of the workpiece or broken
insertion tools may fly off and cause injuries
even outside the direct working area.
 If the insertion tool is at risk of coming
into contact with concealed power cables
or the power cord itself, hold the power
tool by the insulated grip surfaces only.
Contact with a live cable may also cause
metal parts of the appliance to become
live and result in an electric shock.
 Keep the power cord away from rotating
insertion tools.
If you lose control of the appliance, the
power cord could be severed or become
caught and your hand or arm may strike
the rotating insertion tool.
 Never put down the electric power
tool until the insertion tool has come
to a standstill.
The rotating insertion tool may come into
contact with the support surface, possibly
resulting in you losing control of the electric
power tool.
 Never leave the electric power tool
running while you are carrying it.
Your clothing may become caught by
accidental contact with the rotating insertion
tool which may then drill into your body.
 Regularly clean the ventilation slots on
your electric power tool.
The motor fan draws dust into the housing;
a large build-up of metal dust may cause
electrical hazards.
 Never use the electric power tool near
combustible materials.
Sparks may ignite these materials.
 Never use insertion tools which require
liquid coolants.
The use of water or other liquid coolants may
result in electric shock.
 Do not use oversized sanding sheets, but
follow the manufacturer's specifications
for the size of sanding sheets.
Sanding sheets which project over the
sanding pad may cause injuries as well
as block and rip the sanding sheets
or cause a kickback.
Recoil and appropriate safety
instructions
Kickback is the sudden reaction to a pinched
or snagged rotating insertion tool, such as
a sanding disc, sanding pad, etc.
Pinching or snagging may cause a rotating
insertion tool to stop abruptly. As a result, an
uncontrolled electric power tool is accelerated
against the direction of rotation of the insertion
tool at the blocking point.
A recoil occurs if the electric power tool is used
incorrectly or improperly.
A recoil can be prevented by appropriate
precautions as described below.
 Hold the electric power tool firmly and
position your body and arms to allow
you to absorb kickback forces. If fitted,
always use the auxiliary handle to ensure
the best possible control over the recoil
forces or reaction torques when
acceleration occurs. The operator can
control kickback and reaction forces
by taking appropriate precautions.
15