Spare Parts And Accessories; Disposal Information; Declaration Of Conformity; Exemption From Liability - Flex LK 604 Instrucciones De Funcionamiento Originales

Grinder LK 604
Repairs
Repairs may be carried out by an authorised
customer service centre only.

Spare parts and accessories

Spare-part/Accessory
Side handle
Face spanner
Elastic sanding pad
+ M14 clamping nut
Handle cover
SoftVib handle with integrated
clamping nut wrench
Other accessories can be found in the
manufacturer's catalogues.
Exploded drawings and spare-part lists can
be found on our homepage:
www.flex-tools.com

Disposal information

t^okfkd>
oÉåÇÉê=êÉÇìåÇ~åí=éçïÉê=íççäë=ìåìë~ÄäÉ=
Äó êÉãçîáåÖ=íÜÉ=éçïÉê=ÅçêÇK
EU countries only
Do not throw electric power tools into
the household waste!
In accordance with the European Directive
2012/19/EC on Waste Electrical and
Electronic Equipment and transposition into
national law used electric power tools must
be collected separately and recycled in an
environmentally friendly manner.
klqb
mäÉ~ëÉ=~ëâ=óçìê=ÇÉ~äÉê=~Äçìí=Çáëéçë~ä=
çéíáçåë>
We declare under our sole responsibility that
the product described under "Technical
specifications" conforms to the following
standards or normative documents:
Order no.
252.721
100.110
Responsible for technical documents:
124.079
FLEX-Elektrowerkzeuge GmbH, R & D
Bahnhofstrasse 15, D-71711 Steinheim/Murr
253.676
316.857
Eckhard Rühle
Manager Research &
Development (R & D)
29.05.2015
FLEX-Elektrowerkzeuge GmbH
Bahnhofstrasse 15, D-71711 Steinheim/Murr

Exemption from liability

The manufacturer and his representative are
not liable for any damage and lost profit due
to interruption in business caused by the
product or by an unusable product.
The manufacturer and his representative are
not liable for any damage which was caused
by improper use of the power tool or by use
of the power tool with products from other
manufacturers.

-Declaration of Conformity

EN 60745 in accordance with the regu-
lations of the directives
2004/108/EC (until 19.04.2016),
2014/30/EU (from 20.04.2016),
2006/42/EC, 2011/65/EC.
Klaus Peter Weinper
Head of Quality
Department (QD)
19