Dometic MAGICSAFE MS 680 Instrucciones De Montaje Y De Uso página 16

Connecting the alarm system electrically
Connecting the ultrasonic module (fig. 5 2)
Insert the white 3-pin plug of the connection cable into the connection of the
ultrasonic module.
Connecting the ultrasonic sensors (fig. 5 1)
➤ Insert the red plug of the ultrasonic sensor cable into the red connection of the
ultrasonic module (fig. 9 5).
➤ Insert the red plug of the ultrasonic sensor cable in the white connection of the
ultrasonic sensor (fig. 9 5).
Yellow (indicator)
➤ Connect the yellow cable of PIN 4 (8-pin plug of the connection cable on the
MS680 control unit) (fig. 9 10) to PIN 18 of the right indicator cable (60-pin
green plug of the vehicle fuse box) (fig. 9 8).
➤ Connect the yellow cable of PIN 8 (8-pin plug of the connection cable on the
MS680 control unit) (fig. 9 10) to PIN 19 of the left indicator cable (60-pin green
plug of the vehicle fuse box) (fig. 9 8).
8.2 Optional connection options
Brown/black (central locking system)
➤ Connect the brown/black cable of PIN 17 (20-pin plug of the connection cable)
(fig. 9 1) to PIN 27 (60-pin green plug from the vehicle fuse box) (fig. 9 8), if
you would like to also open and lock the vehicle with the additional hand-held
transmitter as well as activate and deactivate the MS680.
Grey/black (central locking system)
➤ Connect the grey/black cable of PIN 16 (20-pin plug of the connection cable)
(fig. 9 1) to PIN 53 (60-pin green plug from the vehicle fuse box) (fig. 9 8), if
you would like to also open and lock the vehicle with the additional hand-held
transmitter as well as activate and deactivate the MS680.
14
MS680
EN