Product Description; First Steps - testo 410-2 Manual De Instrucciones

14

Product description

Product description
At a glance

First steps

 Inserting batteries:
1 To open the battery compartment, push the battery cover
down.
2 Insert batteries (2x 1.5 V type AAA). Observe the polarity!
3 To close the battery compartment, push the battery cover
back on.
 Basic settings (configuration mode):
Adjustable functions
· Unit of temperature: °C, °F
· Unit of humidity: %, td (dew point), WB (wet bulb)
· Unit of velocity: m/s, km/h, fpm, mph, kts, Beau
· Auto off function: OFF, ON (instrument switches off automatically if no key is
pressed for 10 minutes)
1 When switching the instrument on, press and hold
and
- The adjustable function is displayed. The current setting
flashes.
2 Press
3 Press
4 Repeat steps 2 and 3 for all functions.
- The instrument changes to measuring mode.
appear on the display (configuration mode).
( ) several times until the desired setting flashes.
( ) to confirm the input.

Protection cap: Park position

Impeller

Humidity/temperature sensor

Display

Control keys

Battery compartment (on rear)
until