WARNING: Bite feature included with device contains a Neodymium magnet. Magnets could affect the functioning of pacemakers and implanted heart defibrillators. If you use these devices,
keep sufficient distance from magnet. Warn others who wear these devices from getting too close to magnets.
•
Magnet may lose part of its adhesive force permanently if exposed to temperatures above 175o F (80o C).
•
Magnets produce far-reaching, strong magnetic field. They could damage TVs and laptops, computer hard drives, credit and ATM cards, data storage media, mechanical watches, hearing
aids and speakers. Keep unit away from devices and objects that could be damaged by strong magnetic fields.
WARNING: Do not attempt to open the Phantom 2. The Phantom 2 contains a rechargeable lithium ion battery. Risk of explosion if battery is replaced with incorrect type.
•
Do not attempt to open, disassemble or service the internal battery. The battery must be replaced by a qualified technician.
•
Do not crush, puncture or short the battery' s external contacts. Do not expose to temperatures above 140
•
Do not charge the battery if ambient temperature is over 113
•
Properly recycle or dispose of the battery. Do not dispose in fire or water.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Shielded interface cable must be used with the equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules. Specifications and designs are subject to
change without any notice or obligation on the part of the manufacturer.
Disposal of Electric and Electronic Equipment (Applicable in the EU and other European countries with separate collection systems)
This equipment contains electric and/or electronic parts and must therefore not be disposed of as normal household waste. Instead, it should be disposed at the respective
collection points for recycling provided by the communities. For you, this is free of charge. If the equipment contains exchangeable (rechargeable) batteries, these too must be
removed before and, if necessary, in turn be disposed of according to the relevant regulations (see also the respective comments in this unit's instructions). Further information
about the subject is available at your community administration, your local waste collection company, or in the store where you purchased this equipment.
Industry Canada Statement
This device complies with ISED's licence-exempt RSSs. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Radiation Exposure Statement:
This device complies with the Industry Canada portable RF exposure limit set forth for
an uncontrolled environment and is safe for the intended operation as described in this
manual. Further RF exposure reduction can be achieved if the product can be kept as far
as possible from the user's body or if the device is set to a lower output power if such
function is available.
F (45
C)
o
o
FCC ID: 2ASQI-36211
IC: 24886-36211
F (60
C).
o
o
Industry Canada Statement
Le présent appareil est conforme aux CNR d' ISED applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes: (1) le dispositif ne doit pas
produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y
compris un brouillage susceptible de provoquer un fonctionnement indésirable.
Déclaration d'exposition aux radiations:
Le produit est conforme aux limites d'exposition pour les appareils portables RF pour les
Etats-Unis et le Canada établies pour un environnement non contrôlé. Le produit est sûr
pour un fonctionnement tel que décrit dans ce manuel. La réduction aux expositions RF
peut être augmentée si l'appareil peut être conservé aussi loin que possible du corps de
l'utilisateur ou que le dispositif est réglé sur la puissance de sortie la plus faible si une telle
fonction est disponible.