The Wheels; The Brake; The Push Bar; The Pushchair Seat - Mutsy NEXO Manual De Instrucciones

The wheels

Assemble the rear wheels (e)
· Slide the axle of the rear wheel in the rear wheel casing until you hear
a click.
· Pull the wheel to check that it has been attached firmly.
Disassemble the rear wheels (f)
· Press the button at the back side of the rear wheel casing and take the
wheel off the frame
Assemble the front wheels (g)
· Slide the axle of the front wheel upwards in the front wheel casing until
you hear a click.
· Pull the wheel to check that it has been attached firmly.
Disassemble the front wheels (g)
· Push the button on the back side of the front wheel (g1) and pull the
wheel from the front wheel casing. (g2)
The swivelling wheels (h)
· Turn the ring above the front wheel outwards on both sides in order to
block the swivel setting. The swivelling wheels will automatically be
locked when the wheels are placed in the rear direction.
· Turn the ring above the front wheel on both sides inwards to unlock
the swivelling wheels.
The brake (i)
· Push the brake pedal downwards with your foot to block the rear wheels.
· Push the brake pedal upwards with your foot to unblock the rear
wheels.
The push bar (j)
· The push bar has three different height positions. Press the height ad-
justment buttons (j1) and move the push-bar higher or lower while
keeping the buttons depressed.
· Release the button when the push bar is in the desired position.
The pushchair seat (0 months up to 15 kg)
· The pushchair seat is suitable for children from 0 months and upwards,
up to 15 kg. The back support and leg support are adjustable. Make
sure that the frame has been fully unfolded and the brake is blocked
during all actions indicated below.
EN
19