Disinfection And Cleaning - Photonic ATO ML 600B Manual Del Usuario

Disinfection and Cleaning

To clean, wipe the surfaces with a slightly damp
cloth. If necessary, a mild soap solution can be
used. Then wipe dry with a soft anti-static cloth.
Attention: Before disinfection and cleaning, the
light must be disconnected from the mains!
The light incl. support arm system should be
decontaminated on a daily basis or immediately
after contamination with a suitable disinfectant
(e.g. Meliseptol
Attention: Wipe cleaning and disinfection only!
Never spray cleaning agents or disinfectants
directly onto the surfaces!
Hygiene guidelines as well as corresponding safety
measures for the cleaning and disinfection
procedures to be used must be defined by the
operator. Please refer to the guidelines of your
health care facility!
Attention: To avoid the embrittlement of
surfaces, do not use agents > 60% alcohol!
1
Recommended and validated by the manufacturer
1
, Braun) by wipe disinfection.
35