Publicidad
English
FUNCTIONS DESCRIPTION
1. Weather symbols icons
2. Temperature
3. Clock
4. Indoor humidity
5. Date
6. Moon phase
7. Key MODE, setting the date and clock / view clock and alarm
8. Key UP / AL, up key / alarm activation
9. Key DOWN / C/F, down key / change temperature °C/°F
10. Key MEM, view maximum and minimum values recorded for
temperature and humidity
11. Key LIGHT, turn on backlight
12. Key SNZ, temporary deactivation of the alarm
13. Battery compartment 2xAAA (not included)
14. Alarm symbol
POWER SUPPLY
Open the battery compartment (13) on the rear of the appliance and
insert two "AAA" size batteries respecting the polarities.
SETTING THE CLOCK
1. Press and hold the MODE key (7) to start the clock setting.
2. Set the time display 12/24 hours in by using the UP (8) or
DOWN (9) key.
4. Set the hour using the UP (8) or DOWN (9) keys.
6. Set the minutes using the UP (8) or DOWN (9) keys.
8. Set the year using the UP (8) or DOWN (9) keys.
10. Set the month using the UP (8) or DOWN (9) keys.
12. Set the day using the UP (8) or DOWN (9) keys.
SETTING AND ACTIVATING ALARM
1. Press the MODE key (7) to access the alarm function, reco-
gnisable by the Bell symbol appears on the right of the display
(14).
2. Press and hold the MODE key (7) to start the alarm setting.
3. Set the hour using the UP (8) or DOWN (9) keys.
5. Set the minutes using the UP (8) or DOWN (9) keys.
7. The alarm will be activated automatically and will display the
clock.
8. At the setted hour the alarm will be activated. To temporarily turn
off the alarm press the SNZ key (12). The alarm will reactivate
automatically after 5 minutes.
9. To turn off the alarm, press the UP / AL key (8) until the demise
of the alarm symbol
WEATHER FORECASTS
The digital barometer detects changes in barometric pressure and
shows the weather forecast symbol (1). This weather forecast refers
to the next 12/24 hours.
For example: If the barometer detects a high pressure, the display
will show the symbol of the Sun, but externally it might rain.
Note:
wrong weather forecast.
TEMPERATURE AND HUMIDITY
The temperature value is located in the upper right corner of the
display, while the humidity value is shown below the temperature.
The values are automatically updated every 30 seconds.
1. Press the C/F key (9) to select the unit of measurement of
temperature in °C or °F.
2. Press the MEM key (10) continuously to display the minimum
and maximum values observed for temperature and humidity.
3. Bring on the maximum or minimum value and press and hold
the MEM key (10) to reset the maximum or minimum value
recorded of temperature and humidity.
MOON PHASE
Shows the lunar cycle in four phases (6).
TECHNICAL DATA
Weather station: ........... from -9.9°C to +60°C
Indoor humidity: ............ from 10% to 99% RH (relative humidity)
Unit: .............................. 0,1°C for the temperature
............................... 1% for the humidity
Watch: .......................... Quartz
Power Supply: .............. 2xAAA
ME 3106
(14).
3
3
Publicidad
