About The Manual; What'S In The Box - Harman JBL STADIUM BASSHUB Manual Del Propietário

THANK YOU FOR YOUR PURCHASE . . .
Your JBL product has been designed to provide you with
the performance and ease of operation you would expect
from JBL.
• Please take time to read your owner's manual in its
entirety before operating or installing your subwoofer.
• Keep the owner's manual for your amplifier in your glove
compartment along with the owner's manual for your car.
• Put your subwoofer sales receipt with other important
documents in order to expedite warranty service if
needed.

ABOUT THE MANUAL

This manual describes general installation guidelines
and operation instructions. However, please note that
proper installation of mobile audio and video components
requires qualified experience with mechanical and electrical
procedures. If you do not have the knowledge and tools to
successfully perform this installation, we strongly recommend
consulting an authorized JBL dealer about your installation
options. Keep all instructions and sales receipts for reference.
Consider this manual as an indispensable feature of your
subwoofer.

WHAT'S IN THE BOX

1x Stadium BassHub
1x wiring harness
1x vehicle mounting post
1x vehicle mounting adapter
1x 2.5mm Allen wrench
1x Quick-start guide
1X
1X
1X
JBL STADIUM BASSHUB
1X
1X
1X
MOUNTING THE STADIUM BASSHUB
The Stadium BassHub mounts inside the rim of the spare tire
in your trunk. To mount the Stadium BassHub properly, follow
these steps:
1. Remove the vehicle's spare mounting post.
2. Make sure that the spare tire is placed in the trunk with
the outside of the tire facing downwards; the back of
the rim should be facing you. This will ensure sufficient
mounting depth for the Stadium BassHub.
3. Carefully place the Stadium BassHub inside the rim of
the spare tire.
4. Insert the Stadium BassHub mounting post into the slot
in the center of the Stadium BassHub. When it reaches
the spare tire mounting bracket, begin turning clockwise
to thread the post into the bracket and tighten.
NOTE: Some applications require the use of the included
adapter to provide a threaded slot for the mounting post.
Insert the adapter into the spare tie-down bracket and twist
to lock into place. Then repeat steps 3 and 4 above.
NOTE: To keep from damaging the Stadium BassHub or the
spare tire rim, do not overtighten the mounting post.
M8
Take out the original base
EN