Burner Description - Ecoflam MAX GAS 350 LN P TC SGT 230-50 TW Manual Del Usuario

Contents
­ Burner description

Burner description

MAX GAS P are single-stage, fully
automatic, monoblock type burners.
Burner head is designed to get the lowest
emissions in terms of NOx and unburnt
particles in order to maximize the heat
generator efficiency. Emissions can be
different respect to the ones recorded in
the lab because they depends a lot on the
generator on which the burner is fit.
The installer must comply with compulsory
rules. Avoid for instance dangerous
atmosphere or not ventilated rooms.
Technical label
Tampering, removal or absence of plate
burner or anything that not allow the
secure identification of the burner make
difficult for any installation and
maintenance activity.
Notes for the operator
The system should be inspected by a
specialist at least once a year. It is
advisable to take out a maintenance
contract to guarantee regular servicing.
For any other use, the authorization of Ecoflam is required.
WARNING
Scope of delivery
The burner is delivered in a modular system
of packagings i.e. separate set/box:
BBCH: Burner Body with Combustion Head
with flange.
- 1 bag including :
- multilanguage technical manual.
- wieland plug.
- screws, nuts and washer.
GT: separate Gas Train
KIT & ACS are managed and delivered separately
A1
5
420010492303
KIT & ACS delivered separately
8
113
MAX GAS 350 P TC TW
NAME
MAX GAS Gas
MODEL
MAX GAS 350 350 kW
EMISSION
­ Low NOx
OPERATION TYPE
P 1 stage
PAB 2 stages
HEAD TYPE
TC Short head
TL Long head
CONTROL BOX
TW Ariston E-BCU
FUEL
Natural gas
LPG LPG
A1 E-BCU control unit
3 Air regulation in the burner head
5 Housing
8 Blast tube
15 Burner flange
16 Reset key
113 Air intake
16
www.ecoflam­burners.com
3 15
EN
7