Confirming The Installation; Performing A Trial Backup - Quantum DLTtape SDLT 220 Guia De Inicio Rapido

Confirming the Installation

Follow these steps to confirm that the installation was successful:
a.
Power on the tape drive and the host computer.
b.
If your system displays BIOS, OS, and SCSI controller information
at startup, check to confirm that the host successfully recognizes the
tape drive.
c.
Let the tape drive finish its Power-On Self-Test.
d.
Launch your backup software.
e.
Confirm that your backup software recognizes the tape drive.

Performing a Trial Backup

To perform a trial backup:
a.
Insert a data cartridge into the tape drive. Ensure that you are using a
Super DLTtape I™ data cartridge, as shown in the illustration.
b.
Push the data cartridge completely into the drive. The tape loads
automatically. The green LED lights steadily when the tape drive is
ready for use.
c.
Do a trial backup.
Choose a sample file set from the host computer. Perform a backup
and then restore the file set. If the backup and restore complete with-
out errors, you have installed the drive correctly.
d.
To unload the cartridge, press the Eject button on the front of the
drive and remove the cartridge.
For troubleshooting information, refer to the SDLT 220 and
SDLT 320 User Reference Guide and the SDLT 220 and SDLT
320 Product Manual.
•
4 Confirming the Installation