Installation And Use - arjo Enterprise ENT-ACC64 Instrucciones De Uso

ENT-ACC64 is designed to support monitoring and diagnostic equipment on Arjo Enterprise®
E5X, E8X and E9X series hospital beds.
ENT-ACC74 is designed to support monitoring and diagnostic equipment on Arjo Enterprise®
E5X, E8X, E9X and Citadel series hospital beds.
Refer to the bed instructions for use to confirm compatibility before using this accessory.
Do not exceed the monitor shelf safe working load of 12kg for
ENT-ACC64 and 25kg for ENT-ACC74.

Installation and use

1. Insert the ends of the frame (1) into the accessory sockets (2) at the foot end of the bed,
with the shelf (3) on the outside of the foot end panel as shown below.
2. Lift the shelf and rotate it through 270° so that it lies horizontally above the foot end of the
mattress platform.
WARNING
3
2
1
EN