Symbols Used In This Manual; Important Safety Information; Symbols On The Power Tool; For Your Safety - Flex FBE 8-140 Instrucciones De Funcionamiento Originales

FBE 8-140
Contents
Symbols used in this manual . . . . . . . . 11
Symbols on the power tool . . . . . . . . . . 11
Important safety information . . . . . . . . . 11
Noise and vibration . . . . . . . . . . . . . . . . 12
Overview . . . . . . . . . . . . . . . . . . . . . . . . 13
Technical specifications . . . . . . . . . . . . 14
Operating instructions . . . . . . . . . . . . . . 14
Maintenance and care . . . . . . . . . . . . . . 16
Disposal information . . . . . . . . . . . . . . . 17
-Declaration of Conformity . . . . . . . . 17
Exemption from liability . . . . . . . . . . . . . 17

Symbols used in this manual

WARNING!
Denotes impending danger. Non-
observance of this warning may result in
death or extremely severe injuries.
CAUTION!
Denotes a possibly dangerous situation.
Non-observance of this warning may result
in slight injury or damage to property.
NOTE
Denotes application tips and important
information.

Symbols on the power tool

Before switching on the power
tool, read the operating manual!
Wear goggles!
Disposal information for the old
machine (see page 17)!

For your safety

WARNING!
Before using the power tool, please read and
follow:
these operating instructions,
-
the "General safety instructions" on the
-
handling of power tools in the enclosed
booklet (leaflet no.: 315.915),
-
the currently valid site rules and the
-
regulations for the prevention of accidents.
This power tool is state of the art and has
been constructed in accordance with the
acknowledged safety regulations.
Nevertheless, when in use, the power tool
may be a danger to life and limb of the user
or a third party, or the power tool or other
property may be damaged. The power tool
may be operated only if it is
as intended,
-
in perfect working order.
-
Faults which impair safety must be repaired
immediately.

Intended use

This belt file is designed
- for commercial use in industry and trade,
- for sanding and polishing metal surfaces
which are difficult to access,
- for use with sanding belts and accessories
which are indicated in these instructions or
which are recommended by the
manufacturer.
Safety instructions for sander
WARNING!
Read all safety instructions and other
instructions. Failure to observe the safety
instructions and other instructions may result
in an electric shock, fire and/or serious
injuries . Keep all safety instructions and
other instructions in a safe place for the
future.
 Hold the device by the insulated grip
surfaces, as the sanding belt may come
into contact with the power cord itself.
A damaged live cable may cause metal
parts of the device to become live and
result in an electric shock.
 Do not use the electric power tool if it has a
damaged power cord. Do not touch the
damaged power cord and pull out the
mains plug if the power cord is damaged
during work. Damaged power cords
increase the risk of an electric shock.
 Use the electric power tool for dry sanding
only. If water penetrates the electric power
tool, there is an increased risk of electric
shock.
11