Switching On And Off - Flex FBE 8-140 Instrucciones De Funcionamiento Originales

FBE 8-140
Attach the handle
.
Attach the auxiliary handle to the thread in
position 1 or 2.
Adjusting the belt run
Adjust the belt run using the front screw on the
sanding arm (10). While the belt is running,
select the setting so that the belt runs in the
centre of the pressure roller.

Switching on and off

WARNING!
Hold the electric power tool by the insulated
grip surfaces only!
Brief operation without engaged switch
rocker
 Push the switch rocker forwards and hold
in position.
 To switch off the power tool, release the
switch rocker.
Continuous operation with engaged
switch rocker
 Push the switch rocker forwards (1.) and
engage by pressing the front end (2.).
 To switch off the power tool, release the
switch rocker by pressing the rear end.
Belt speed
The belt speed can be adjusted steplessly to
the material requirements with the adjusting
wheel.
15