AIPTEK MobileCinema i120 Manual De Usuario página 15

Troubleshooting
If your projector does not seem to be functioning properly, check the items
below before you contact an authorized service center.
Symptom
The projector does not
work when connecting to
a smartphone, notebook
or PC with cable.
The projector can't be
detected when running
EZCast app.
The projected image is
too dark.
The projected image is
blurred.
The surface temperature
of projector is high.
Recovering from abnormal
User's Manual
Check if HDMI cable is plugged correctly.
1.Enable your WLAN of PC or smartphone and select
the access point labeled 'Projector-XXXXXXXX' to connect
with the projector.
2.Disconnect the Ethernet cable from your computer to
avoid affecting the wireless network connection.
1.Use the projector in a darker environment.
2.Increase the brightness by using the power adapter.
3.Scale down the projectional image size.
1.Adjust the focus. Please refer to "Adjusting the Focus".
2.Check if the lens is dirty.
Because of the high-luminance LED, it is normal that this
projector generates heat in long-time use. It will not affect
the performance of the projector. Always keep the ventilation
slots free of dirt or obstructions and operate the projector
in a properly ventilated environment.
If the projector is running slow, freezing, crashing or
locking up during the operation, you can try to insert a
slim, pointy object into the reset hole to trigger a hardware
reset.
15
Check Point