Led Indicators; Adjusting The Focus - AIPTEK MobileCinema i120 Manual De Usuario

Getting Started
Charging the product
The projector is built with
an embedded battery for
mobile use. Please charge
the projector for 5 hours
prior to its first use. Repeat
charging will take around
3 hours.
The battery will be charged only when the projector is not in use (Power off).
Connect one end of the supplied power adapter to DC IN jack and the other
end to a power outlet to start charging.
Exchange the plug (EU, US etc.) of AC adapter that accommodates the type
of power outlet in your country.
Charging LED Indicator
During charging, the LED indicator lights will flash as marquee. While the
battery is fully charged, the LED indicator lights turns to solid blue.

LED indicators

LED Status
3 blue LEDs stay on
2 blue LEDs stay on
1 blue LED stays on
1 blue LED blinks
LED Marquee
Power On / Off / Standby
Push the Power button for 2 seconds to turn on the projector.
Push the Power button again for 3 seconds to turn off the projector.
Standby mode: Push the Power button for 1 second to turn on / off the
projector lamp to save the battery and system reboot time. (The LEDs are
still on when the projector is in standby mode.)

Adjusting the Focus

Place the projector on a flat surface and
toward a wall or a projection screen.
Adjust the focus by turning the focus ring
to get a sharp and clear picture.
Note:
Use a tripod to increase the height of the projectional image
when necessary. The tripod socket is located under the projector.
User's Manual
Power capacity is between 80% to 100%
Power capacity is between 45% to 80%
Power capacity is between 10% to 45%
Power capacity is below 10%
Projector is being charged
6
Indication