Built-In Cd Player; Playing A Cd (Only Avh-P6400Cd) - Pioneer AVH-P6400CD Operación Manual

Section

Built-in CD Player

07
Playing a CD
(Only AVH-P6400CD)
3
These are the basic steps necessary to play a
CD with your built-in CD player. More advanced
CD operation is explained starting on page 29.
1
TRACK NUMBER
Shows the track currently playing.
2
indicator
PLAY TIME
Shows the elapsed playing time of the cur-
rent track.
3
DISC TITLE
When playing a CD TEXT disc, the DISC
TITLE is displayed. With regular CDs that do
not usually have the titles recorded on them,
is displayed (refer to page 32).
NO TITLE
1 Insert a CD into the CD loading slot.
Playback will automatically start.
• After inserting a CD, press
the built-in CD player.
• You can eject a CD by pressing
head unit.
• To avoid a malfunction, make sure that no
metal object comes into contact with the opera-
tion panel when it is detached.
28
En
1 2
indicator
to select
SOURCE
CD loading slot
TEXT
EJECT
EJECT
2 Use
VOLUME
Rotate to increase or decrease the volume.
3 To perform fast forward or reverse, press
and hold 2 or 3 .
4 To skip back or forward to another track,
press 2 or 3 .
Pressing 3 skips to the start of the next track.
Pressing 2 once skips to the start of the current
track. Pressing again will skip to the previous
track.
Notes
• The built-in CD player plays one, standard,
12-cm or 8-cm (single) CD at a time. Do not
use an adapter when playing 8-cm CDs.
• Do not insert anything other than a CD into
the CD loading slot.
• If you cannot insert a disc completely or if
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press
EJECT
disc, and check the disc for damage before
inserting the disc again.
• If the built-in CD player does not operate prop-
erly, an error message such as
be displayed. Refer to Understanding built-in
CD player error messages on page 71.
• Do not detach with a CD partially inserted in
the CD slot as it may scratch or damage the
disc.
button
on the
to adjust the sound level.
on the head unit to eject the
ERROR-11
may