Audio Adjustments; Introduction Of Audio Adjustments - Pioneer AVH-P6400CD Operación Manual

Audio Adjustments

Introduction of audio
adjustments
1
The display for this MENU is the same regard-
less of which source you operate from.
1
display
AUDIO
Shows the audio adjustments status.
1 Press in each source display.
A.MENU
MENU is displayed.
2 Press 5 or ∞ to select
.
A.MENU
The AUDIO MENU is displayed as follows:
(fader/balance adjustment)—
FAD/BAL
(equalizer curve adjustment)—
MENU
(bass)— (treble)—
TREBLE
ness)— (subwoofer)—
SUB WOOFER
(non fading)—
ING HPF
(source level adjustment)
You can operate a desired function. For details,
refer to the pages for each of the functions.
is only displayed when
NON FADING
is set in INIT MENU. (SUB
CTRL:EXTERNAL
WOOFER is not displayed.)
, and press
AUDIO
EQ
BASS
(loud-
LOUDNESS
NON FAD-
(high pass filter)—
SLA
S.W
• When the subwoofer controller setting is
or
CTRL:EXTERNAL REAR SP: S.W
switch the
SUB WOOFER
• When the subwoofer controller setting is only
, you can switch the non
S.W CTRL:EXTERNAL
fading output on/off mode. (Refer to page 61.)
• When selecting the FM tuner as the source,
you cannot switch to
SLA
• Select in the MENU display or press
BACK
to return to the previous display.
BACK
Pressing on the head unit returns you to
WIDE
the previous display.
• To return to the playback display, press
or on the remote control.
BAND/ESC WIDE
• When the setting is
REAR SP: S.W
indications are for
BAL
Note
• If you do not operate the audio function within
about 30 seconds, the display is automatically
returned to the source display.
S.W
, you cannot
. (Refer to page 61.)
.
,
FAD/BAL
.
En
Section
12
57