Setting The Automatic Open Mode; Setting The Time - Pioneer AVH-P6400CD Operación Manual

Other Functions
Setting the automatic open
mode
To prevent the display from hitting the shift lever
of an automatic vehicle when it is in the "P"
(park) position, or when you do not wish open-
ing/closing of the display to be carried out auto-
matically, you can switch this function ON/OFF.
1 Press 5 or ∞ to select
SET UP MENU, and press
AUTO FLAP adjustment indications are dis-
played.
2 Press 2 to select the manual.
Press 2 until the OPEN/CLOSE:MANUAL
setting appears in the display. Each time you
press a manually set display's EJECT, the dis-
play opens or closes.
3 Press 3 to select the auto.
Press 3 until the OPEN/CLOSE:AUTO set-
ting appears in the display. With auto setting,
the display automatically opens or closes when
power to this unit is switched ON.
Note
• If you do not operate the function within
about 30 seconds, the display is automatically
returned to the playback display.

Setting the time

This is used to set the time on the unit's clock
display.
1 Press 5 or ∞ to select
the SET UP MENU, and press
CLOCK ADJUST indications are displayed.
2 Press 5 or ∞ to select
from the
AUTO FLAP
.
A.MENU
from
CLOCK ADJUST
.
A.MENU
or .
ON OFF
When is selected, the clock is shown in the
ON
display.
When is selected, the clock is not shown in
OFF
the display.
3 Select the portion of the time display you
wish to set with 2/3.
Pressing 2/3 will select a portion of the clock
display:
— —
HOUR MINUTE ADJUST
4 Press 5 or ∞ to slide to
minute is reset.
After reset, is displayed.
00
Note
• If you do not operate the function within
about 30 seconds, the display is automatically
returned to the playback display.
Section
, and the
ADJUST
69
En
14