Edit Mode - Powis Parker FASTBACK 8x Manual Del Usuario

All manuals and user guides at all-guides.com
VII
USER MENU (continued)
H. EDIT MODE
The Edit Mode enables removal and insertion of pages in a
document previously bound by the Model 8x binder.
1. Select EDIT MODE in the User Menu. The display will read
"READY TO EDIT."
2. Open and flatten your document to the page you wish to
remove. Fold down the corner of that page.
3. Behind this page insert the new page you want to add
(figure 43). Slip it in as far as you can. When you're sure it's
straight, close your document.
43
F I G U R E
4. Put your document in the binder and press the BIND
button. This begins the Edit cycle.
5. While the binder is re-melting the spine adhesive, pinch
the front and back portions of the document with one
hand, leaving the bent page free (figure 44). When the
clamps start to open and the display reads "EDIT NOW,"
immediately pull the bent page from the document.
(Holding the front and back portions of your document
keeps the remaining pages in place.) If the page doesn't
remove easily the first time, simply repeat this step.
As soon as you remove the bent page, tap down the new
page until it's flush with the rest of the document.
Make sure you are directly tapping the document's pages—
not just the tops of the document's covers. Now press the
BIND button again. The binder will now rebind the book.
6. When the display flashes "REMOVE BOOK," place the
44
F I G U R E
edited document between the cooling fences for five
minutes.
FASTBACK MODEL 8x USER'S MANUAL, L4079 Rev. C 04/08/05 17