meilan BLADE Guía De Usuario Rápida página 8

②B1:1 means device is search for the sensors of first bike;when below
four signs
means BLADE device is searching all
sensors of this kind and trying to connect;
When one of the sensors has been
connected by BLADE; the icon will stop
flashing, and the display will be always on.
:BLADE is searching for a connected
sensor.
:Only when the four sensors of
speed, cadence, heart rate and power
are all connected successfully, BLADE will display SUCC; If you don't need to
connect all the four types of sensors men oned above, you just need to make
sure that the icon of the sensor you need to connect has stopped flashing. If
it's constantly on without flashing again, it means that the sensor is
connected successfully.
③ A er confirming that the sensor you need to
connect has been connected, short press
se ng of first bike rim circumference. The set of rim
circumference can be viewed and modified in the app.
are flashing, it
CLEAR: If BLADE device has paired with sensors already
before,it will show next page when it is in paring page
again; means to clear all pairing; Press
to confirm; it will remove all paired sensors in device
and reconnect with sensors.
Searching for first bike sensor
Flashing
start the
Searching And
Paring
Paired Successfully.
W
key
-07-