Safety Information - EHEIM air pump 100 Manual Del Usuario

English
Thank you
for buying the new EHEIM auarium aerator. You have chosen a
quality product from EHEIM. The EHEIM air pump is finished to a
high standard and is extremely reliable. The new housing design
type ensures that noise is kept to the level of a whisper. Your
EHEIM air pump is delivered complete with air hose and outlet and
can be used for a variety of functions within the aquarium. Some
application examples: oxygen enrichment of the aquarium water,
operation of filters and decorative elements or for creating a water
current. Before putting your EHEIM air pump in operation or per-
forming maintenance work, please take a few minutes to read the
following instructions carefully.
Aquarium aerator
(1) Control knob (air volume), (2) power supply cord,
(3) air hose, (4) outlet, (5) bubble pattern, (6) wall moun-
ting eyelet, (7) drip loop, (8) anti-skid feet and vibration
damper, (9) air filter

Safety information

Never touch mains plug with wet hands.
Warning:
Before undertaking any maintenance work, switch off all units
in the aquarium or unplug the mains plug!
In order to avoid danger, always have damaged power cords
(2) replaced by the manufacturer, the manufacturer's service
personnel or similarly qualified persons.
Only for use inside.
Putting the unit into operation for the first time
- Check the unit for damage and for completeness.
Mounting location / Positioning:
-Always install above the water level and outside the aqua
rium (Fig. B) to prevent water from running back into the
air pump.
-Do not place on or above the aquarium. Choose the moun
ting location / positioning so that the aerator cannot drop
into the water or "walk".
We recommend mounting using the wall mounting eyelet
(Fig. B).
- Cut the hose (3) to the required length and connect the out-
let (4) to the aquarium aerator. Place the outlet with suction
device in the aquarium (Fig. B).
- 8 -